Pandit Ji Iron Store
Our Services
1. Iron & Steel Materials
Iron rods (round, TMT, square bars)
Steel angles, channels, flats
Sheets (GI, MS, SS)
Pipes (MS, GI)
Wire mesh & binding wire
2. Tools & Equipment
Welding equipment & accessories
Cutting tools & saws
3. Construction Materials
Cement, sand, gravel (in some stores)
Binding wire
Pipes (iron)
🛠️ Services Offered in an Iron Store
1. Material Cutting Service
Iron rod cutting
Steel sheet cutting
Pipe cutting
2. Custom Fabrication (in some stores)
Welding & fabrication of gates, grills, frames
Custom ironworks as per order
Local delivery of heavy materials (iron rods, sheets, etc.)
Estimation of iron quantity for construction
Pricing quotations for bulk orders.
Fly's ash bricks
Iron Angle
Iron Pipe
Shuttering Gatter
Steel Pipe
TMT
Iron flate
Cement
Call For Bookings
+919410889326 +919258463925
What is a Thermal Insulation Sheet?
A thermal insulation sheet is a flat or flexible insulating material used in buildings, industrial equipment, appliances, and vehicles to limit heat flow by conduction, convection, and radiation.
Common Materials Used
Thermal insulation sheets are made from different materials depending on the application:
Foam-based sheets
Polyurethane (PU)
Polystyrene (EPS/XPS)
Polyethylene foam
👉 Lightweight, good insulation, widely used in buildings
Reflective insulation sheets
Aluminum foil (often combined with foam or bubble layers)
👉 Reflects radiant heat, commonly used in roofs
Fiberglass sheets
Made from fine glass fibers
👉 Excellent thermal resistance, fire-resistant
Mineral wool / Rock wool
Made from volcanic rock or slag
👉 Fireproof, sound insulation, high-temperature resistance
Rubber insulation sheets
Nitrile rubber (NBR)
👉 Flexible, moisture-resistant, used for HVAC pipes
Key Properties
Low thermal conductivity (reduces heat transfer)
Lightweight
Moisture resistant (in many types)
Fire resistance (material dependent)
Sound insulation (added benefit)
Uses of Thermal Insulation Sheets
Buildings: roofs, walls, ceilings, floors
Industrial equipment: boilers, furnaces, pipelines
HVAC systems: ducts and pipes
Automotive: engine compartments, interiors
Cold storage & refrigeration
Solar and energy systems
Benefits
Reduces energy consumption
Lowers electricity and fuel costs
Improves thermal comfort
Protects equipment from heat damage
Reduces carbon footprint
Thickness & Sizes
Thickness typically ranges from 3 mm to 100 mm
Available in rolls or rigid sheets
Can be cut to required size
Choosing the Right Insulation Sheet
Consider:
Operating temperature
Indoor or outdoor use
Fire safety requirements
Moisture
exposure
Budget and lifespan
🔩 What is an MS Black Pipe (APL Apollo)?
An MS black pipe is a mild steel pipe with a black finish (often due to surface oil/oxidation) made from low-carbon steel. The “black” finish isn’t paint — it’s the natural oxide and oil coating that helps protect the steel from rust until further treatment or use. These pipes are commonly called APL Apollo MS Black Pipes when produced by APL Apollo Tubes Ltd., a leading Indian steel pipe maker. aplapollo.com+1
📏 Sizes & Specifications
Outer Diameter (Round pipes): ~15 NB to 350 NB (approx 21.3 mm – 355 mm) aplapollo.com
Wall Thickness: ~0.7 mm – 8.0 mm (varies by size & schedule) aplapollo.com
Lengths: Typically ~4 m to 12 m (standard industrial lengths) aplapollo.com
Standards: IS-1239(Part I)/2004, BS/DIN/EN/ASTM equivalents depending on variant and requirement. Scribd
Process: ERW (Electric Resistance Welded) or wrought depending on specification. seamlesssteelindustries.co.in
🧰 Common Uses
APL Apollo MS black pipes are versatile and used in:
✔ Construction & Structural Support – frameworks, supports, columns, scaffolding. aplapollo.com
✔ Plumbing & Water Lines – cold water piping in buildings (non-galvanized). aplapollo.com
✔ Agriculture/Irrigation – pumping and distribution pipes. aplapollo.com
✔ Fire Fighting & HVAC – sprinkler systems and ductwork. aplapollo.com
✔ Industrial Engineering – conveyors, mechanical structures, general engineering. Scribd
🧱 Key Characteristics
✅ Strong & Durable: Made of mild steel with good mechanical strength. aplapollo.com
✅ Easy to Weld & Fabricate: MS pipes can be cut, bent, welded into structures. aplapollo.com
✅ Cost-Effective: Less expensive than galvanized or stainless steel options. aplapollo.com
⚠ Needs rust protection: If used outdoors or for water supply without coating, they should be painted or treated because the black surface offers limited corrosion resistance. aplapollo.com
🛠️ Typical Variants You Can Buy
Here are some examples you might find available in India:
Steel Pipes (Black Finish):
APL Apollo MS Black Pipe – Mild steel black pipe (sold per kg; widely used structural/pipe application).
2 Inch APL Apollo MS Pipe – Standard 2″ black steel pipe for water, structure, etc.
APL Apollo Square MS Pipe 220×220×4 mm – Square MS tube for structural framing.
APL Apollo MS Square Pipe – Square section MS pipe, often used in construction/fabrication.
MS Hollow Pipes – Hollow section pipes for structural uses.
🏗️ Himalaya TMT Bars / Himalaya Super TMT
📍 What They Are
TMT (Thermo-Mechanically Treated) bars are reinforcement steel bars processed to have a tough outer layer and a ductile core through controlled heating and cooling.
Brands like “Himalaya Super” or “Himalaya Gold” TMT are sold in some regions of India (often Uttarakhand, UP, etc.) as construction reinforcing bars for concrete structures. Facebook+1
📌 Key Features (Typical for TMT Bars)
✔ High Yield Strength & Toughness – Helps support heavy loads in concrete structures. Facebook
✔ Ductility & Bending Capability – Can bend/re-bend without cracking. Comaron
✔ Good Bonding With Concrete – Ribbed surface improves grip. Comaron
✔ Corrosion Resistance relative to ordinary mild steel. Comaron
📏 Grades & Uses
Common grades you’ll find (if available locally under the Himalaya brand):
Fe 415, Fe 500, Fe 550, Fe 600 – Different strength levels for residential to heavy industrial applications. Facebook
Smaller sizes (8–16 mm) for slabs, ties, stirrups.
Larger (20–32 mm) for beams, columns, foundations.
🔎 Note: Availability and actual certification (e.g., IS:1786) depend on the manufacturer supplying the brand locally — always check supplier specifications and test certificates before purchase.
🧱 Himalaya MS Angles & Flats
Products like angles (L-section) and flats (flat bars) are widely used structural steel sections.
📍 What They Are
MS Angle Bars — L-shaped steel used for frames, trusses, braces, and support structures.
MS Flats (Flat Bars) — Rectangular cross-section used for base plates, tie bars, brackets, railings, etc.
These are structural merchant bars, not reinforcing rods, but complementary in steel fabrication.
📌 Typical Properties
✔ Mild steel (MS) offers good weldability and ductility.
✔ Available in various sizes (e.g., 25×25×3 mm, 40×40×6 mm for angles; 25×6 mm, 50×10 mm flats).
✔ Used in fabrication, construction, general engineering. Securities and Exchange Board of India
📌 Standards
Depending on supplier, they may conform to IS 2062 or equivalent quality standards for structural steel. Securities and Exchange Board of India
🛠️ Summary of Uses
| Product | Typical Use |
|---|---|
| TMT Bars (Himalaya Super / Gold) | Reinforcement in concrete structures (beams, columns, slabs) |
| MS Angles | Structural frameworks, brackets, shelves |
| MS Flats | Plates, connectors, stiffeners in fabrication |
📌 Important Buying Tips
✅ Check the grade & certification (e.g., BIS/IS:1786 for TMT bars).
✅ Verify supplier test certificates (Mechanical + chemical tests).
✅ Match sizes to your project design (consult your engineer).
✅ Ensure clear brand marking on each bar to avoid counterfeit products.
🔗 1. Welding Mesh (Welded Wire Mesh)
🧾 What it is
Welding mesh is made by electrically welding steel wires at each intersection to form a square or rectangular grid.
👀 How it looks
Steel wires crossing each other
Fixed square/rectangular openings
Supplied in sheets or rolls
Surface: black (MS) or silver (GI)
📐 Common Sizes
Wire diameter: 2 mm – 8 mm
Mesh opening: 25×25 mm, 50×50 mm, 75×75 mm
Sheet size: approx. 6×4 ft, 8×4 ft
⚙️ Types
MS welded mesh – black, needs paint for rust protection
GI welded mesh – zinc coated, rust-resistant
🏗️ Uses
Slab reinforcement (light RCC work)
Boundary walls & fencing
Floor strengthening
Cage making, safety guards
🟤 2. MS (Mild Steel) Iron Sheet
🧾 What it is
An MS iron sheet is a flat sheet made from low-carbon mild steel, without any zinc coating.
👀 How it looks
Dark grey or black color
Smooth or slightly rough surface
Supplied as plain sheets or coils
📐 Thickness Range
0.8 mm to 25 mm
Standard sizes: 8×4 ft, 10×4 ft
⚙️ Properties
✔ Strong and tough
✔ Easy to cut, bend & weld
⚠ Rusts easily if not painted
🏭 Uses
Fabrication work
Machinery parts
Water tanks (after coating)
Automobile & industrial bodies
Structural fabrication
⚪ 3. GI (Galvanized Iron) Sheet
🧾 What it is
A GI sheet is an MS sheet coated with zinc, which protects it from rust and corrosion.
👀 How it looks
Silver, shiny surface
Sometimes spangled (flower-like zinc pattern)
Available in plain or corrugated form
📐 Thickness Range
0.3 mm to 4 mm
⚙️ Properties
✔ Excellent rust resistance
✔ Long life & low maintenance
✔ Suitable for outdoor use
🏠 Uses
Roofing sheets
Sheds & godowns
Ducting & HVAC
Electrical panels
Outdoor structures
📊 Quick Comparison Table
| Feature | Welding Mesh | MS Iron Sheet | GI Sheet |
|---|---|---|---|
| Shape | Grid / mesh | Flat sheet | Flat sheet |
| Rust Resistance | Low (MS) / High (GI) | Low | High |
| Welding | Not required (already welded) | Easy | Possible |
| Outdoor Use | GI type preferred | Not recommended | Best |
| Cost | Medium | Lower | Higher |
📝 Buying Tips
✔ For reinforcement & fencing → Welding Mesh
✔ For fabrication & welding work → MS Iron Sheet
✔ For roofing & outdoor use → GI Sheet
✔ Always check thickness, weight & IS standard
🔧 1. Iron Cutting Wheel (Cut-Off Wheel)
🧾 What is it?
An iron cutting wheel is a thin abrasive disc used with an angle grinder or cutting machine to cut iron, mild steel, pipes, rods, sheets, and bars.
SIZE- 4INCH , 5 INCH,14 INCH
🔥 2. Welding Electrode (Welding Rod)
🧾 What is it?
A welding electrode is a metal rod coated with flux used in arc welding to join two metal pieces
AVILABLE BRAND – TAJ ARC AND FLUX ARC
📌 What Are Cement Sheets?
Cement sheets are building boards made from cement mixed with reinforcing fibers (like cellulose or synthetic fibers) to make a strong, durable sheet used in construction. They are different from metal roofing — cement sheets are non-metallic and have the strength of cement with added flexibility from fibers. Wikipedia
🧱 Types & Forms
🏠 1. Fibre Cement Roofing Sheets
Products like the Fibre Cement Roofing Sheets, Cement Roofing Sheet, Cement Roofing Sheets 6 mm, and Corrugated Cement Roofing Sheet are commonly used as roof panels.
✔ Made of cement + fibers
✔ Often used for homes, huts, sheds, farm buildings, warehouses
✔ Sizes typically range from about 6 mm up to 12 mm thickness depending on strength needs Justdial
🧩 Key Features of Cement Sheets
🔹 Strength & Durability
The combination of cement and fibres gives sheets good structural strength and load-bearing capacity. Justdial
🔥 Fire & Heat Resistance
Cement sheets are non-combustible and can withstand high temperatures without melting or warping (advantage over metal and plastic sheets). Everest Industries
💦 Moisture Resistance
They offer good resistance to water and moisture, making them suitable for roofing and damp climates. Justdial
🐜 Pest & Corrosion Resistance
Unlike wood, they don’t rot or attract termites; and unlike metal sheets, they won’t rust or corrode. Everest Industries
🏗️ Common Uses
✔ Roofing — houses, warehouses, sheds, garages
✔ Wall cladding — exteriors and interiors
✔ Partition walls / ceilings
✔ Bases for tiles or finishes
✔ Underlay for floors or roofing insulation Justdial
🧪 Standards & Quality
In India, fibre cement flat sheets are often manufactured to BIS standard IS 14862:2000, ensuring quality, strength, and performance for both external and internal applications. Aleph INDIA®
📌 Advantages
✅ Fire-resistant & heat proof
✅ Moisture & weather resistant
✅ Good sound insulation
✅ No rust or termite issues
✅ Can be painted or finished easily.